Subaru LEGACY OUTBACK 2017 Owner's Manual page 22

■
switch/
These are used in the following situations.
When switching the screen displayed on the multi information display.
When changing the Warning Volume settings, etc.
Refer to page 89.
■
(Info)/SET switch
This is used in the following situations.
When displaying the message that appeared in the warning screen area again.
Refer to page 91.
When changing the Warning Volume settings, etc.
Refer to page 89.
■
(Pre-Collision Braking System OFF) switch
Press and hold this switch for approximately 2 seconds or longer to turn off the Pre-Collision
Braking System and Pre-Collision Throttle Management.
When these functions are off, the Pre-Collision Braking System OFF indicator light on the
instrument panel illuminates.
Press and hold the switch again to turn on the Pre-Collision Braking System and Pre-
Collision Throttle Management. This turns off the Pre-Collision Braking System OFF indica-
tor light.
Refer to page 30.
■
(Lane Departure Warning OFF) switch
Press and hold this switch for approximately 2 seconds or longer to turn off the Lane
Departure Warning and Lane Sway Warning functions.
When these functions are off, the Lane Departure Warning OFF indicator light on the instru-
ment panel illuminates.
Press and hold the switch again to turn on the Lane Departure Warning and Lane Sway
Warning functions. This turns off the Lane Departure Warning OFF indicator light.
Refer to page 70.
switch
About EyeSight
19