Table of Contents
Advertisement
■ Following distance setting indicator
Indicates the following distance setting that was set with the
setting) switch.
Refer to page 45.
■ Set vehicle speed display
Displays the set vehicle speed.
Refer to pages 38 and 76.
■ Your vehicle indicator
When the brake pedal is depressed or the brake control function is active, the brake light on
the indicator illuminates in red.
■ Lane Keep Assist indicator
This indicator illuminates when Lane Keep Assist is turned on by pressing the
Keep Assist) switch.
While the Lane Keep Assist system is activated, if the vehicle travels across a lane
marker, the indicator turns from white to green.
Refer to pages 54 and 58.
■ Select lever/gear position indicator
This indicator illuminates and shows which position the select lever or the gear is in.
■ Lane indicator
When Lane Keep Assist is in the standby status or is operating, the lane indicator of the
detected lane will illuminate (left, right or both left and right).
Either the left or right indicator blinks depending on which side your vehicle is drifting
towards when Lane Departure Warning operates.
The left and right indicators alternately blink when Lane Sway Warning operates.
Refer to pages 68 and 71.
■ EyeSight warning indicator (yellow)
This indicator illuminates or flashes when a malfunction occurs in the EyeSight system.
When it is illuminated or flashing, none of the EyeSight functions can be used (including
Adaptive Cruise Control and the Pre-Collision Braking System, etc.).
Refer to page 86.
About EyeSight
/
(Following distance
(Lane
15
Advertisement
Table of Contents
