Subaru LEGACY OUTBACK 2017 Owner's Manual page 42

(2) Setting Adaptive Cruise Control
Press the RES/SET switch to the "SET/-".
Adaptive Cruise Control is now set, and cruise
control will start.
If no vehicle in front has been detected, the
vehicle drives at the constant set target
speed.
When Adaptive Cruise Control is set, the set
speed and are displayed on the EyeSight
display area.
The target vehicle speed can be set between 25 MPH (40 km/h) and 90
MPH (145 km/h).
If the vehicle speed is approximately 25 MPH (40 km/h) or less when the
vehicle speed is set, the set vehicle speed is set to 25 MPH (40 km/h).
When driving on a curve, the vehicle may not accelerate, or may deceler-
ate, even if the set speed is higher than the current vehicle speed.
If the EyeSight display portion
the multi information display does not illuminate, even when the
(CRUISE) switch is pressed, the cruise control with Adaptive Cruise Con-
trol function will not operate. If this condition continues, the system is likely
malfunctioning. Contact a SUBARU dealer to have the vehicle inspected.
NOTE
(Adaptive Cruise Control indicator) on
Adaptive Cruise Control
S01986
S02322
39