Access FLOW X User Manual page 37

Access Flow X stairli t - User Manual - Use
4.5.4 ACCEPTiNG iNCOMiNG CALLS
The landline is connected to the Communication Module. An incoming call can
therefore also be accepted while using the stairli t.
1.
When there is an incoming call, the Communication Module produces a ring tone.
Accepting the call is done as follows:
1. Briefly press the yellow alarm button once. The connection is now established.
Speak in the direction of the alarm button to communicate.
The call can be ended by pressing the yellow alarm button for 1 second.
4.5.5 ERROR CODES
LED colour
Flashing red
Flashing red
Flashing green
When calling, flashing
red
Green (a ter trying to
call)
For other questions, please contact your supplier.
1 s
Sound
None
Two short beep sounds,
not repeating.
Two beep sounds,
repeating every 2
minutes
Two beep sounds, 1
second pause, two beep
sounds, not repeating
None
Cause
Not connected to a base
station or no base station
selected
CM power supply is lost or
backup battery is charging
The CM tries to reconnect
to the registered base
station
No telephone numbers
programmed
No telephone line present
33