Adjusting The Safety Belt - Access FLOW X User Manual

28 Access Flow X stairli t - User Manual - Use
4.2

ADJUSTiNG THE SAFETY BELT

The safety belt is self-adjusting but can
also be adjusted manually if necessary (see
image).
1. Remove the cap from the buckle.
2. Unroll the end of the belt ribbon.
3. If the belt ribbon needs to be shortened,
insert the belt retractor ribbon into the
buckle and feed it through the buckle.
4. If the belt ribbon needs to be extended,
feed the end of the ribbon through the
buckle.
5. Roll the end of the belt ribbon into the
recess in the buckle.
6. Refit the cap on the buckle.
Detecting the safety belt (optional)
For models that are equipped with safety belt detection, the stairli t detects if the
safety belt is fastened or not.
WARNING
Do not omit function of the safety belt detection by putting any object in
the safety belt engagement eye, other than the safety belt buckle.
NOTE
If the stairli t is equipped with safety belt detection and the safety belt
is not fastened, the stairli t cannot be operated with the joystick user
interface or attendant control. The stairli t can only be operated with the
call-and-park station.