Access FLOW X User Manual page 16

12 Access Flow X stairli t - User Manual - Description
3.3.2.2 FULL ENROUTE SWiVEL SEAT
The stairli t is equipped with the patented ASL (Advanced Swivel and
Leveling) technology that makes the chair rotate and stay level. The
technology o ers the user maximum comfort. The swivel points of the
chair are individually programmed in such a way that the user is
always in the best possible seating position. The simultaneous movement of the
swivel and leveling module keeps the chair in a horizontal position, independent of
the angle the rail is inclining or declining.
Additional stops and swivel moments during the ride are avoided. The chair
rotation at the bottom or top of the staircase makes it easier to get on and o
the stairli t. With the ASL technology, the stairli t can be installed in small and
narrow staircases while making sure that other persons can still walk the stairs.
Remodeling work at the staircase is not necessary.
Before you sit down or stand up, the chair will automatically turn into the required
direction when you control the stairli t with the joystick user interface or the call-
and-park station. The chair can also turn backwards when you go upstairs and
forward when you go downstairs.
Instructions
Sitting down
1. Push the call button on the call-and-park control station to call the chair to the
Halt position and turn the chair into the boarding position.
2. Turn both armrests to the open position (position 3, see 4.1.1) until you hear
and feel that the armrests are locked.
3. Unfold the seat.
4. Sit down on the chair.
5. Unfold the footrest.
6. Fasten the safety belt.
7. Put the armrests in position 2 (45 degrees inwards (depending on configuration)
see 4.1.1).
8. Pull the joystick in upright position, then push and hold it to the le t or to the
right to move the stairli t. The chair will turn into the riding position and start
moving.