Daikin Madoka BRC1H81S7 Installation And Reference Manual page 56

13 | Operation
Installer and user reference guide
56
▪ Setpoint range limitations
▪ Central control / control by a schedule
Setpoint range
If any limitations are set to the default setpoint range (16°C~32°C) with the
setpoint range function (Madoka Assistant app function; see
4
range" [ 111]), it is only possible to raise or lower the setpoint up/down to the set
upper/lower setpoint range limits.
Example: if the reference temperature is 25°C, you can normally lower the
setpoint three steps to 22°C. However, if a setpoint range limit is set to 23°C, you
can only lower the setpoint to 23°C.
28°C
+3°C
25°C
-2°C
23°C
Central control / Schedule
If the system is under the control of a centralised controller or a schedule, then the
regular +3°C/–3°C setpoint range limits can get overruled AND changed.
IF
The centralised controller or schedule
imposes a setpoint that is within the
regular +3°C/–3°C setpoint range.
THEN
Nothing unusual happens and the
system follows the regular setpoint and
setpoint range logic.
Madoka wired remote controller
"Setpoint
BRC1H81W+S7
4P513690-1D – 2020.12