Table of Contents
Advertisement
14.2 Software update
14.2.1 About software updates
14.2.2 Software update with app
BRC1H81W+S7
Madoka wired remote controller
4P513690-1D – 2020.12
It is strongly recommended that the remote controller has the latest software
version. There are two ways to perform a software update.
Software update
Madoka Assistant app
Updating tool
INFORMATION
▪
When the software of a controller is out-of-date, the Madoka Assistant app will
suggest a software update for that controller as soon as you try to connect it (the
controller) to the app.
▪
Checking the current controller software version is possible from the information
screen (see
("About the information
To update the software with the app:
1 Make sure that Bluetooth is activated on the remote controller (
on the home screen). If not, activate Bluetooth according to the instructions
set out in
"To make a Bluetooth
2 In the home screen of the app, tap the tile of the remote controller of which
you want to update the software, and follow the instruction from there.
INFORMATION
The Madoka Assistant app is available from Google Play and the App Store.
INFORMATION
When it is the first time you connect a remote controller to your device, app and
user interface initiate a numeric comparison procedure. To successfully connect the
controller to the app, follow the procedure.
After each successful connection to a mobile device, the controller automatically
stores information about that mobile device, this to facilitate future reconnection.
This information is called "bonding information".
When no bonding information is stored, (i.e. at first connection, or after it got
manually removed), you will have to go through the numeric comparison procedure.
When bonding information is stored, you can connect the controller to the mobile
device just by making the controller send out a Bluetooth signal and tapping the tile
of the controller in the app. The controller will then connect to the mobile device
automatically.
Bonding information gets stored automatically, and can be removed manually.
Remove the bonding information from the controller when you want to update the
software from another mobile device than the one the controller contains
information about.
"Software update with
"Software update with updating
4
"Information
screen" [
48]) and/or from the information menu
4
menu" [
84]).
connection" [
14
Configuration
|
Instructions
app" [
4
tool" [
88]
4
86].
Installer and user reference guide
4
85]
displayed
85
Advertisement
Table of Contents
Troubleshooting
