11
|
Starting up the system
11.1.1 To designate a controller as slave
Installer and user reference guide
42
INFORMATION
After re-designating a controller, the system requires a power reset.
INFORMATION
Slave controllers do not support all functions. If you cannot find a function on a slave
controller, check for it on the master controller.
INFORMATION
For master and slave controllers to function together, they need to have the same
value for the "Home screen setpoint" setting (Madoka Assistant app setting), i.e. all
set to "Numerical" or all set to "Symbolic".
Prerequisite: A master controller is already connected to the indoor unit.
1 Connect a second controller.
Result: It will start up automatically.
2 Wait for a U5 or U8 error to appear on the screen.
3 When the U5 or U8 error appears, press
appears on the screen.
Result: The controller is now designated as slave.
and keep it pressed until "2"
BRC1H81W+S7
Madoka wired remote controller
4P513690-1D – 2020.12