Table of Contents
Advertisement
13.6 Ventilation
13.6.1 Ventilation mode
To set the ventilation mode
BRC1H81W+S7
Madoka wired remote controller
4P513690-1D – 2020.12
INFORMATION
Ventilation settings can ONLY be made for heat reclaim ventilation units.
The heat reclaim ventilation unit can operate in various operation modes.
Icon
Energy Reclaim Ventilation. The outdoor air is supplied to the
room after passing through a heat exchanger.
Bypass. The outdoor air is supplied to the room without passing
through a heat exchanger.
Auto. To ventilate the room in the most efficient way, the heat
reclaim ventilation unit automatically switches between "Bypass"
and "Energy Reclaim Ventilation" mode (based on internal
calculations).
INFORMATION
Depending on the heat reclaim ventilation unit, more or less ventilation modes are
available.
INFORMATION
Ventilation mode changes are possible regardless of Cooling/Heating masterhood.
For more information, see
NOTICE
Before starting up the system, the unit MUST be energised for at least 6 hours to
avoid compressor breakdown during startup.
INFORMATION
To ensure a smooth start, do not turn off the system while it is operating.
1 Navigate to the ventilation mode menu.
2 Use
and
to select a ventilation mode.
3 Press
to activate.
Result: The heat reclaim ventilation unit changes its operation mode and the
controller returns to the home screen.
Ventilation mode
"Cooling/Heating
masterhood" [
13
Operation
|
4
82].
Installer and user reference guide
61
Advertisement
Table of Contents
Troubleshooting
