10
|
Installation
10.3 Connecting the electrical wiring
10.3.1 Precautions when connecting the electrical wiring
10.3.2 To connect the electrical wiring
From the top
Installer and user reference guide
38
INFORMATION
Also read the precautions and requirements in the following chapters:
▪
General safety precautions
▪
Preparation
WARNING
All field wiring and components MUST be installed by a licensed electrician and
MUST comply with the applicable legislation.
CAUTION
When connecting the controller to the indoor unit, make sure the indoor unit
switchbox and transmission wiring are not connected.
NOTICE
The wiring for connection is NOT included.
NOTICE
When wiring, run the wiring away from the power supply wiring in order to avoid
receiving electric noise (external noise).
INFORMATION
P1 and P2 have no polarity.
Connect controller terminals P1/P2 to indoor unit terminals P1/P2.
P1P2
BRC1H81W+S7
Madoka wired remote controller
4P513690-1D – 2020.12