Water Separator Alert; Engine Trouble Alert - Yamaha F40G Owner's Manual

Instruments and indicators
Stop the engine immediately if the buzzer
sounds and the overheat alert device has ac-
tivated. Check the cooling water inlet for
clogging.
ECM01592
NOTICE
Do not continue to run the engine if the

overheat-alert indicator blinks. Serious
engine damage will occur.
Do not continue to operate the engine if

a alert device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
EMU36150

Water separator alert

This indicator will blink if water has accumu-
lated in the water separator (fuel filter) while
cruising. In such an event, stop the engine
immediately and see page 96 of this manual
to drain the water from the fuel filter. Get
back to the port soon and consult a Yamaha
40
dealer immediately.
ZMU05421
ZMU05422
ECM00910
NOTICE
Gasoline mixed with water could cause
damage to the engine.
EMU36160

Engine trouble alert

This indicator will blink if the engine malfunc-
tions while cruising. Get back to the port
soon and consult a Yamaha dealer immedi-
ately.
ZMU05423
ZMU05424
ZMU05425