Start-Up Checks - Yamaha F40G Owner's Manual

even if the cooling water pressure sensor is
not installed, the cooling water pressure dis-
play can be shown by connecting an optional
sensor to the unit. For the optional sensor,
consult your Yamaha dealer. The tachome-
ter unit is available in round or square types.
Check your tachometer unit type.
1
1. Set button
2. Mode button
5
4
7
6
8
1. Tachometer
2. Trim meter
3. Multifunction display
4. Cooling water pressure
5. Cooling water/engine temperature
6. Water detection-alert indicator
7. Battery voltage
8. Oil pressure (4-stroke models)
2
ZMU05415
1
2
3
ZMU05416
Instruments and indicators
1
1. Set button
2. Mode button
3
6
1. Tachometer
2. Trim meter
3. Multifunction display
4. Water detection-alert indicator
5. Engine trouble alert/maintenance indicator
6. Cooling water pressure
7. Oil pressure (4-stroke models)
8. Cooling water/engine temperature
9. Battery voltage
EMU36190

Start-up checks

Place the remote control lever / gear shift le-
ver in neutral and turn the main switch to
" " (on). After all the displays come on and
the total hour display comes on, the gauge
will change to normal operation. If the buzzer
sounds and the water separator-alert indica-
tor blinks, consult your Yamaha dealer im-
1 4 5 2
7 8 9
2
ZMU05417
ZMU05418
37