Engine; Flushing Device; Install Top Cowling - Yamaha F40G Owner's Manual

level mark and lower level mark. Consult
your Yamaha dealer if the oil level is out
of specified level or if it appears milky or
dirty.
1
1. Oil dipstick
1 3
1. Lower level mark
2. Oil dipstick
3. Upper level mark
EMU27153

Engine

Check the engine and engine mounting.

Look for loose or damaged fasteners.

Check the propeller for damage.

Check for engine oil leaks.

EMU36493

Flushing device

Check that the flushing device's garden hose
connector is securely screwed on to the fit-
ting on the bottom cowling. NOTICE: If the
ZMU05089
2
ZMU05091
garden hose connector is not properly
connected, cooling water can leak out
and the engine can overheat during oper-
ation.
[ECM01801]
1. Fitting
2. Flushing device
1
2
1. Fitting
2. Flushing device
EMU36954

Install top cowling

1. Be sure that the cowling lock lever is re-
leased.
2. Be sure that the rubber seal is seated all
the way around the top cowling.
3. Place the top cowling on the bottom
cowling.
4. Check to be sure the rubber seal is seat-
ed correctly between the top cowling
Operation
2
1
ZMU06056
ZMU07080
51