sounds and the overheat alert device has ac-
tivated. Check the cooling water inlet for
clogging.
ECM01592
NOTICE
Do not continue to run the engine if the
G
overheat-alert indicator blinks. Serious
engine damage will occur.
Do not continue to operate the engine if
G
a alert device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
EMU36150
Water separator alert
This indicator will blink if water has accumu-
lated in the water separator (fuel filter) while
cruising. In such an event, stop the engine
immediately and see page 99 of this manual
to drain the water from the fuel filter. Get
back to the port soon and consult a Yamaha
dealer immediately.
ECM00910
NOTICE
Gasoline mixed with water could cause
damage to the engine.
EMU36160
Engine trouble alert
This indicator will blink if the engine malfunc-
tions while cruising. Get back to the port
soon and consult a Yamaha dealer immedi-
ately.
Instruments and indicators
ECM00920
NOTICE
In such an event, the engine will not oper-
ate properly. Consult a Yamaha dealer
immediately.
EMU36170
Low battery voltage-alert
If the battery voltage drops, the low battery
voltage-alert indicator and the battery volt-
age value will start to blink. Get back to the
port soon if the low battery voltage-alert de-
vice has activated. For charging the battery,
consult your Yamaha dealer.
ZMU05423
EMU36232
6Y8 Multifunction speed & fuel
The speed & fuel meter unit shows the boat
speed and has the functions of fuel meter, to-
tal fuel consumption display, fuel economy
display, fuel flow display, and system voltage
ZMU05425
ZMU05427
meters
38