Fuel Gauge; Fuel Tank Cap; Air Vent Screw; Remote Control Transmitter - Yamaha F40G Owner's Manual

Components
EMU25841

Fuel gauge

This gauge is located on either the fuel tank
cap or on the fuel joint base. It shows the ap-
proximate amount of fuel remaining in the
tank.
EMU25850

Fuel tank cap

This cap seals the fuel tank. When removed,
the tank can be filled with fuel. To remove the
cap, turn it counterclockwise.
EMU25860

Air vent screw

This screw is on the fuel tank cap. To loosen
the screw, turn it counterclockwise.
EMU38591

Remote control transmitter

The lock and unlock modes of the Yamaha
Security System are selected using the re-
mote control transmitter. While the engine is
running, input from the remote control trans-
mitter is not received.
Store the remote control transmitter carefully
so it will not be lost.
ECM02100
NOTICE
The remote control transmitter is not

completely waterproof. Do not sub-
merge the transmitter or operate it un-
derwater. If
submerged, dry it with a soft, dry cloth,
and then check that it is operating prop-
20
ZMU06455
the transmitter
erly. If the transmitter is not operating
properly, contact a Yamaha dealer.
Keep the remote control transmitter

away from high temperatures and do
not place it in direct sunlight.
Do not drop the remote control trans-

mitter, subject it to strong shocks, or
place any heavy items on it.
Use a soft, dry cloth to clean the remote

control transmitter. Do not use deter-
gent, alcohol, or other chemicals.
Do not attempt to disassemble the re-

mote control transmitter yourself. Oth-
erwise, the transmitter may not operate
properly. If the transmitter needs a new
battery, contact a Yamaha dealer.
If you have lost the remote control

transmitter, consult your Yamaha deal-
er. Keep the least 2 transmitters at all
the time. If you have lost both transmit-
ters, consult your Yamaha dealer.
TIP:
Since the receiver is programmed to rec-

ognize the internal code from this transmit-
ter only, the security system setting can
only be changed with this transmitter. If the
remote control transmitter does not oper-
ate properly, contact a Yamaha dealer.
Replace the battery cell after 1 year, and

every two years thereafter as a standard
measure.
Refer to local hazardous waste regulations

when disposing of transmitter batteries.
The Yamaha Security System permits to

register up to 5 remote control transmit-
ters. Consult your yamaha dealer for de-
tails.
EMU38601
is

Receiver

The receiver control the ECM (Electronic
control module) to prevent the engine from