Low Oil Pressure-Alert; Overheat Alert - Yamaha F40G Owner's Manual

Hide thumbs Also See for F40G:
Table of Contents

Advertisement

TIP:
Trolling is affected by currents and other
operating conditions and may differ from
the actual engine speed.
The default engine idle speed is reset au-
tomatically when the display is switched to
the normal display. The default engine idle
speed is also reset automatically when the
engine is turned off or when the engine
speed exceeds 3000 r/min.
When warming up a cold engine, the troll-
ing speed cannot be decreased below the
specified engine idle speed.
EMU36130

Low oil pressure-alert

If the engine oil pressure drops too low, the
low oil pressure-alert indicator will start to
blink, and the engine speed will automatical-
ly decrease to about 2000 r/min.
Instruments and indicators
ZMU05931
ZMU06309
Stop the engine immediately if the buzzer
sounds and the low oil pressure-alert indica-
tor blinks. Check the engine oil quantity and
replenish oil if necessary. If the alert device
has activated while the appropriate engine
oil quantity is maintained, consult your
Yamaha dealer.
ECM01601
NOTICE
Do not continue to run the engine if the
low oil pressure alert device has activat-
ed. Serious engine damage will occur.
EMU36221

Overheat alert

If the engine temperature rises too high while
cruising, the overheat-alert indicator will start
to blink. The engine speed will automatically
decrease to about 2000 r/min.
ZMU05430
ZMU05431
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

F40dF50fFt50gF60cFt60dF70a

Table of Contents