Yamaha Security System Lock And Unlock Mode; Remote Control Box; Remote Control Lever - Yamaha F40G Owner's Manual

starting. Consult your Yamaha dealer for in-
stallation of the receiver.
EMU38611
Yamaha Security System lock and
unlock mode
The Yamaha Security System settings are
selected by pressing the lock or unlock but-
ton on the remote control transmitter briefly.
1
1. Lock button
2. Unlock button
LOCK
When the lock button on the remote control
transmitter is pressed briefly, the beeper
sounds once. This indicates the lock mode is
selected and the engine cannot be started.
The lock mode is selected only when the
main switch is in the "
engine cranks but can not be started while
the Yamaha Security System is on lock
mode.
UNLOCK
When the unlock button on the remote con-
trol transmitter is pressed briefly, the beeper
sounds twice. This indicates the unlock
mode is selected and the engine can be
started.
2
ZMU06456
" (off) position. The
Yamaha
Security Number
System of beeps
mode
Lock 1 beep
Unlock 2 beeps
EMU26181

Remote control box

The remote control lever actuates both the
shifter and the throttle. The electrical switch-
es are mounted on the remote control box.
1. Power trim and tilt switch

2. Remote control lever

3. Neutral interlock trigger
4. Neutral throttle lever
5. Main switch
6. Engine shut-off switch
7. Throttle friction adjuster
EMU26190
Remote control lever
Moving the lever forward from the neutral po-
sition engages forward gear. Pulling the le-
ver back from neutral engages reverse. The
engine will continue to run at idle until the le-
ver is moved about 35 (a detent can be felt).
Moving the lever farther opens the throttle,
and the engine will begin to accelerate.
Components
Engine
Main
can be
switch
started
" " NO
" "/"
YES
"
21