Install the Terminal Block
Refer to Figure 5 to install the terminal block on the module while completing the following
steps:
1.
Move the TB-4339/B/C into position in front of the NI PXIe-4339 and engage the
alignment feature with the guide on the associated module.
Figure 5. Installing the TB-4339/B/C on the NI PXIe-4339 Module
3
1
NI PXIe Controller
2
NI PXIe Chassis
2.
Attach the TB-4339/B/C to the NI PXIe-4339 module by pushing the terminal block
straight into the module. A spring mechanism will lock in the bottom of the terminal block.
3.
Tighten the mounting screw at the top of the TB-4339/B/C to attach it to the NI PXIe-4339
module.
For safety purposes and to prevent damage to equipment when high voltages
Note
are present, all SC Express modules and terminal blocks are keyed to prevent
connection between incompatible terminal blocks, modules, and/or cables.
4.
Power on the chassis.
8 | ni.com | NI PXIe-4339/TB-4339 Installation Guide and Terminal Block Specifications
1
5
6
4
3
Mounting Screw
4
TB-4339/B/C Terminal Block
2
5
6
NI PXIe-4339 Module
Alignment Feature