Recommended Connector Cables - Omron NS8-TV0-V2 Setup Manual

4-4 Recommended Connector Cables

Downloaded from Elcodis.com electronic components distributor
Always use recommended connectors, connector hoods, and cables, where possible, when
making connector cables. Depending on the Unit, a connector and connector hood may be
included with the Unit.
Check the required components before preparing them.
Name Model
XM2A-0901
Connector
XM2A-2501
XM2S-0911
Connector XM2S-0911-E
Hood
XM2S-0913
XM2S-2511
AWG28 × 5P
IFVV-SB
Cable
CO-MA-VV-SB
5P × 28AWG
The connector's tensile load is 30 N max. Do not subject the connectors to a
Precautions
for Safe Use load greater than that specified.
• OMRON Cables with Connectors
The following OMRON Cables with Connectors can be used.
Model Cable length
XW2Z-200T 2 m
XW2Z-500T 5 m
XW2Z-200T-2 2 m
XW2Z-200T-5 5 m
• OMRON RS-232C/RS-422A Converter
Model Connection method
Connects directly to
NS-AL002
RS-232C port.
Connects directly to
CJ1W-CIF11
RS-232C port.
The connectors for the connecting cables are not included with the PT and must be
purchased separately.
Details
9-pin type
made by OMRON.
25-pin type
made by OMRON.
9-pin type
made by OMRON.
(mm screws)
9-pin type
made by OMRON.
9-pin type
made by OMRON.
(inch screws)
25-pin type
made by OMRON.
Multiconductor shielded cable
made by Fujikura Densen, Ltd.
Multiconductor shielded cable
made by Hitachi Densen, Ltd.
Connector specifications
9-pin-to-9-pin
9-pin-to-CPM2C peripheral port
Terminal block specifications
8-pole terminal block (1:N NT Link)
5-pole terminal block (1:N NT Link)
4-4 Recommended Connector Cables
Units with the connectors and
connector hoods included.
CS/CJ Series
C-series CQM1 and C200HS
C200HX/HG/HE(-Z)
CVM1/CV-series CPU Units
CV500-LK201
CV500-LK201
C200H-LK201-V1
C-series CQM1 and C200HS
C200HX/HG/HE(-Z)
CVM1/CV-series CPU Units
CV500-LK201
CS/CJ Series
CV500-LK201
C200H-LK201-V1
4-27