Initializing And Saving The Error Log - Omron NS8-TV0-V2 Setup Manual

6-2-5
Downloaded from Elcodis.com electronic components distributor

Initializing and Saving the Error Log

This function initializes the macro error history saved in the PT or saves the history in the
Memory Card.
Up to 100 errors can be recorded in the error log. The number of errors that can be recorded,
however, also depends on the free space in the memory.
The error log records the errors that occur when the macro function is executed. Initialize or
save the error history by using operations from the Initialize Tab Page in the System Menu,
as follows:
Initializing the Error Log
1. Press the Initialize Button.
A confirmation message will be displayed. Press the Yes Button to initialize the data. Press the
No Button to cancel the initialize function.
2. When the PT has completed initializing the error log, a dialog box will be displayed indicating that
the error log has finished being initialized.
Saving the Error Log
1. Press the Save Button. The Save Button will be lit yellow while data is being saved.
2. When the PT has completed saving the error log, the Save Button will return to its nor-
mal color.
A dialog box will be displayed indicating that the save has been finished.
• The error log is deleted when project data or system programs are downloaded.
Reference
• The error log can also be initialized by turning ON $SB42 in system memory from the
host, and can be saved by turning ON $SB43 in system memory from the host. Refer
to 2-4 System Memory in the PT Programming Manual for details.
6-2 Initializing and Saving Data and Removing the Memory Card
6-17