Configuring Your Flexset-Ip 280S; Viewing The Flexset-Ip 280S Mac Address; Inputting The Ip Addresses - Tadiran Telecom FlexSet-IP 280S User Manual

Configuring your FlexSet-IP 280S

Before starting to use your FlexSet-IP 280S, you must first provide your system manager with the MAC number of
your FlexSet (see Viewing the FlexSet-IP 280S MAC address below), after which you must configure the FlexSet IP
address (see Inputting the IP Addresses below).
Use the and
Press at each stage to select and continue or

Viewing the FlexSet-IP 280S MAC address

To view the MAC number, perform the following steps.
Read the MAC number from the label on the base of your FlexSet-IP 280S, or from the label on the packing box;
OR
1. Press the
2. Choose [SysDef].
A password is required as a reminder that these parameters are sensitive and affect the operation of
NOTE:
your FlexSet-IP.
3. Select IP Params > Static > Self MAC Adr.
Make a note of the MAC number that is displayed and give this information to your system manager.

Inputting the IP Addresses

You must now define the relevant IP addresses in your FlexSet. Contact your system manager to determine whether
you will be using a static or dynamic IP address.
Use the table on page 15 to fill in the relevant addresses before you edit the numbers.
Configuring your FlexSet-IP 280S
buttons to scroll through menu options.
key.
SysDe:-IP Params:Static:Self MAC Adr
00-0A-6B-12-34-56
to undo the previous selection.
13 FlexSet-IP 280S User Guide