Ec Declaration - Hyundai HTDT5196 Instructions Manual

Table of Contents

Advertisement

The maintenance of a foam pre-filter is identical to that of a foam cartridge filter, as described above. The cartridge
filter paper should be cleaned with a vacuum cleaner. If it is dirty or contaminated with oil or petrol, replace it.
Clean the cover and inside of the air box with a clean cloth. Evenly apply a thin layer of oil to the outside of the
cartridge filter with a brush (you can use clean engine oil for this). Replace the filter cartridge in its housing and then
replace the lid of the air box, ensuring that each component is in place and properly installed.
Adjusting the transmission cable
In its transmission‐engaged position, the mower's advance lever is pushed fully towards the handlebar. An
incorrectly‐adjusted transmission cable can cause premature wear to the mower's drive system.
If the transmission cable is too tight, it will be difficult to move the advance lever towards the handlebars.
Conversely, if the transmission cable is not tight enough, the transmission will function poorly and will lack
power.
To adjust the tension of the cable transmission,increase or reduce the length of the adjustment device using
the key. Check the effectiveness of the transmission and the resistance of the lever.
Once proper adjustment has been reached, secure the adjustment device by tightening the lock nuts.
8. DECLARATION OF CONFORMITY
Cugnaux, 24/11/2021
Philippe MARIE / CEO
Responsible of technical file: M. Olivier Patriarca
32, rue Aristide Bergès -Z1 31270 Cugnaux - France
Tel. +33 (0) 5.34.502.502 Fax: +33 (0) 5.34.502.503
Declares that the machine named below
PETROL LAWNMOWER
Serial number: 20220125326-20220125605
Complies with the following European Directives:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
Emission directive (UE) 2016/1628 & 2018/989/EU
Other applicable guidelines:
Noise Directive 2000/14/EC Annex VI and 2005/88/EC
Guaranteed Sound Power Level
Sound power level
Intertek Testing & Certification Ltd. (Notified Body 0359)
Davy Avenue, Know hill, Milton Keynes, MK5 8NL
Phone: +44 (0)1908 857777 Fax: +44 (0)1908 857830
Applicable harmonized standards:
EN ISO 5395-1:2013+A1:2018
EN ISO 5395-2:2013+A1:2016+A2:2017
EN ISO 14982: 2009
BUILDER SAS
HTDT5196
98 dB(A)
96.58 dB(A)
Notified body
14

Advertisement

Table of Contents
loading

Table of Contents