Paint Jet Adjustment; Using - Westfalia 92 85 76 Original Instructions Manual

Paint Jet Adjustment


For a high jet (vertically), align the nozzle (4)
horizontally. Use this setting for spraying
larger areas.

For a wide jet (horizontally), align the nozzle
(4) vertically.

Using

1. Before starting to work, check the trigger (5)
to make sure it moves freely.
2. Insert the sieve (11) into the gun.
3. The paint flow regulator (8) is completely shut
by factory default. Turn the paint flow regula-
tor counter clockwise to open it. Turn the fan
regulator (6) counter clockwise until the first
thread pitch is visible.
4. Open the air flow regulator (10) by turning
counter clockwise.
5. Connect the spray gun to the compressed air
supply. The air should be regulated and fil-
tered.
6. Setup the air pressure according to the
parameters supplied with the paint to be
processed.
7. Perform test runs on some test pieces. This
way you can determine the optimum amount
of paint and the different paint jet adjustments.
Notes

Note the parameters given by the manufacturer of the coating materials
to be used. Pour the material to be processed in the paint cup (2) and
carefully close the cup with the lid.
Pay attention that the hole in the lid is free at all times.
Pay attention to the air hose when painting.
Hold the hose firmly with one hand while operating the spray gun with
Operation
26
8
6
10