Mitsubishi Electric VL-350CZPVU-L-E Installation Manual page 42

6.4.6.4 Initializing
The setting values changed by the controller are returned to the factory default setting.
Note
- T he «Function setting» screen will not be displayed when the product operation is not stopped. Press the
the «Service menu» screen to stop the operation.
Initializing
Factory reset?
Reboot after initializing
F1 F2
6.4.7 Restriction (No function)
The product does not have this function.
Commissioning menu
Not available
Unsupported function
Return:
Cursor
F1 F2
6.4.8 Error information
If an error occurs, the following screen will be displayed.
Check the abnormal condition, stop the operation, and consult your dealer.
Error information 1/2
Error code 5101
LC ( Lossnay )
Error unit
M-NET address 0
Model name VL-250CZPVU-R-E
Serial No. 01234567
Reset error:Reset button
Page Reset
F1 F2 F3 F4
Error reset
Reset current error?
Cancel OK
F1 F2 F3 F4
Cancel OK
F3 F4
F3 F4
Error information
Contact information
Dealer
Tel 012-3456-7890
Reset error: Reset button
Page
blinks F1 F2
blinks
Press the button to initialize the data.
The product will restart automatically after initializing the data.
Press the button to return to the previous screen.
2/2
Press the
Press the
Model name, Serial No. and Dealer information will
be displayed only when they are set at 6.4.6.2.
Reset
F3 F4 blinks
Press the
Eng-42
and button to change the page.
button to move to the Reset screen.
button to reset the error information.
button on