Mitsubishi Electric VL-350CZPVU-L-E Installation Manual page 41

6.4.6 Service
6.4.6.1 Accessing the «Service menu» screen
Service menu
Input maintenance info.
Function setting
Initializing
Main menu:
Cursor
F1 F2
6.4.6.2 Input maintenance info.
The following can be set.
The information input at (1), (2), and (3) is displayed on the «Error information» screen.
(1) Model name input: Model names can be registered. (Up to 18 characters)
(2) Serial No. input: Product serial No. can be registered. (Up to 8 characters)
(3) Dealer information input: Dealers' phone numbers can be registered. (Up to 13 characters)
(4) Initialize maintenance info.: The information set at (1), (2), and (3) above can be initialized.
Maintenance information
Model name input
Serial No. input
Dealer information input
Initialize maintenance info.
Main menu:
Cursor
F1 F2
6.4.6.3 Function setting
Set various functions.
Note
- T he «Function setting» screen will not be displayed when the product operation is not stopped. Press the
the «Service menu» screen to stop the operation.
(1) M-NET address: Use [0]. Other than [0], functions (2) and (3) cannot be used.
(2) Function No.: Displays [Function No.] (See 6.5 Function setting)
(3) Data: Displays the setting for [Function No.] (See 6.5 Function setting)
(4) Function: Select Set (Setting)/Conf (Information confirmation) of [Function No].
Function setting
M-NET address
Function No.
Data
Function
Select:
Cursor
F1 F2
F3 F4
F3 F4
0
36
1
Set / Conf
Address
F3 F4
Press the and button to move the cursor.
Press the button to go to the next screen.
Press the and button to move the cursor.
Press the button to go to the next screen.
Press the and button to move the cursor.
Press the and button to change the setting value.
Press the button to go to the next screen.
Eng-41
button on