2 - GENERAL
This controller is fitted as standard on water chillers (or water heaters) equipped with one or two refrigerating circuits and scroll
compressors. It is fitted on water-to-water, air-to-water and reversible air-to-water units.
Depending on the configuration, the board provides the following functions:
- Control of chilled water or hot water temperatures.
- Continuous monitoring of operating parameters.
- Diagnostics and fault storage.
- Setpoint drift based on the outdoor temperature (in heating and cooling modes).
- Communication with the console (remote or local) and the additional boards (fault reporting, BMS communication, Ethernet link for PC).
6