Auxiliary Socket For Fixing Crankshaft Sleeve - wsm 03-CR-E4 Workshop Manual

SPECIAL TOOLS
8. Auxiliary socket for fixing crankshaft sleeve
[1] Extracting tool
A 135 mm (5.31 in.)
B 72 mm (2.83 in.)
C R40 mm (R1.57 in.)
D 10 mm (0.39 in.)
E 20 mm (0.79 in.)
F 20 mm dia. (0.79 in. dia.)
64.80 to 64.90 mm dia. (2.552 to 2.555 in.
G
dia.)
59.80 to 59.90 mm dia. (2.355 to 2.358 in.
H
dia.)
Material SS400
[2] Inserting tool
A 130 mm (5.12 in.)
B 72 mm (2.83 in.)
C R40 mm (R1.57 in.)
D 9 mm (0.35 in.)
E 4 mm (0.16 in.)
F 20 mm (0.79 in.)
G 20 mm dia. (0.79 in. dia.)
H 68 mm dia. (2.68 in. dia.)
59.80 to 59.90 mm dia. (2.355 to 2.358 in.
I
dia.)
64.80 to 64.90 mm dia. (2.552 to 2.555 in.
J
dia.)
Material SS400
8. Auxiliary socket for fixing
crankshaft sleeve
Use for fixing the crankshaft sleeve of the diesel
engine.
NOTE
• This special tool is not provided. Make it
referring to the figure.
03-CR-E4,03-CR-TE4BG
2. GENERAL
2-39
KiSC issued 02, 2021 A