SERVICING
5. Disassembling
2. Remove the injector (1) and its gasket (4).
IMPORTANT
• Do not disassemble the injector (1).
• Do not damage the injector ID code (6).
• Do not get the injectors out of order.
• If the injectors get out of order, it is
necessary to perform injector correction
(writing the injector ID codes (6) to the
engine ECU).
• Store the injectors so they do not get any
dust in them.
(1) Injector
(2) Injector clamp
(3) O-ring
(4) Gasket
03-CR-E4,03-CR-TE4BG
(5) Injector clamp mounting
screw
(6) Injector ID code
5.16 Removing rocker arm assembly
1. Remove the rocker arm assembly (1).
(1) Rocker arm assembly
2. Remove the push rods (2).
(2) Push rod
5.17 Removing cylinder head
1. Remove the intake manifold (1).
(1) Intake manifold
4. ENGINE
4-123
KiSC issued 02, 2021 A