wsm 03-CR-E4 Workshop Manual page 304

4. ENGINE
(21) OK button
7. Click the [Send Specified Active Test Value]
button (22).
(22) Send Specified Active Test
Value button
8. To start DPF manual regeneration, click the [DPF
manual regeneration] button on the machine.
9. Observe the data
regeneration control level / status" (23) value
becomes "0".
(23) DPF regeneration control
level / status
10. Click the [Finish Active Test] button (24) to stop
the data monitor, then click the [Save] button (25)
to save monitor data.
4-200
monitor until the "DPF
(24) Finish Active Test button
11. Click the [Back to Item Select] button (26) to exit
from active test.
(26) Back to Item Select button
K-iSS registration
1. Enter the base model name and serial number to
the "Search with Engine Serial No." window (27),
then click the [Search] button (28).
(27) Search with Engine Serial
No. window
2. Click the [Registration of Service Info.] button
(29).
SERVICING
7. Servicing
(25) Save button
(28) Search button
03-CR-E4,03-CR-TE4BG
KiSC issued 02, 2021 A