2.8 Powering the Camcorder On / Off
2.8.1 Auto Power On/Off
If the camcorder is connected to the vehicle power supply, once start the car
engine, the camcorder will automatically power on and start recording.
Once the vehicle engine shuts down, the camcorder automatically saves the
recording and turns off the power.
2.8.2 Manual Power On/Off
To manually turn on the power, press the POWER button.
To turn off, press and hold the POWER button for at least 2 seconds.
2.8.3 Reset
Press and hold the Power button for 8 seconds to reset the device.
2.9 Initial Settings
Before using the camcorder, we recommend you setup the correct Time zone,
Date and Time.
Note:
Please note that if you press the
button during recording, the system will stop recording and enter
OSD menu. Make sure the recording is already stopped then continue operating the menu.
16