Turning The Digital Camcorder On; Configuring The Initial Date And Time Setup; Getting Started; Turning The Camera Off - HP T500 User Manual
Hewlett-packard camcorder user manual
Hide thumbs
Also See for T500:
- Owner's manual (24 pages) ,
- Support manual (11 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
2.4 Turning the Digital Camcorder On
To power on the camera:
1.
Flip out the LCD panel; the camera will turn on automatically.
2.
Or press [Power Button] for one second.
2.5 Configuring the Initial Date and Time Setup
The time setting screen appears to allow you to setup date and time:
1.
Touch Year, Month, Day, Hour, Minute, and AM/PM to set.
2.
Adjust the numeric value by touching
3.
Touch the [OK] icon to validate the setting.
4.
Touch the Exit icon
2.6 Getting Started
•
To record video:
Press [Video Button] to record video. To stop recording, press it again.
•
To pause recording:
Press [Pause Button] to pause recording. To continue the recording, press it
again.
•
To take a photo during video recording: When recording video, press [Photo Button] to capture the
image. The Dual record icon (
•
To take a
photo: Press [Photo Button] halfway down until the focusing frame turns from white to
green. Then, press it fully down to take photo.
Focusing Frame: White
•
To view stored videos and photos: Press [Playback Button] or touch
switch to the Playback mode.
2.7 Turning the Camera Off
To turn off the camera: You can either press [Power Button] for one second, or you can close the LCD
panel back to its original position.
Operation
(
) to exit.
) briefly appears on the LCD monitor.
/
Focusing Frame: Green
9
Display Screen
on the LCD monitor to
Advertisement
Table of Contents
