This manual is designed to demonstrate the features of your HP Wireless Mini Camcorder f150. All information presented is as accurate as possible but is subject to change without notice. HP shall not be liable for technical or editorial errors or omissions contained herein.For the latest reversion, visit www.hp.com/support. Copyright This manual contains proprietary information protected by copyright.
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment. Trademark Recognition Windows XP/Vista/Windows 7/Windows 8 are registered trademarks of Microsoft Corporation in the United States and/or other countries.
HP Wireless Mini Camcorder f150 Microphone Record Button Status LED Micro SD memory Card Slot Speaker Micro USB Port Strap Hook Mode Indicators: Video Mode Photo Mode Mode Button Direct Mode Cloud Mode Power Button Tripod Mount Strap Mount Clip Mount...
Connect your f150 to your mobile unit or PC directly for remote control, live view, managing albums, and camera & cloud setup. Cloud Mode - Internet Connect the f150 to a Cloud server via Access Point (AP) or mobile Hotspot for Internet live video streaming or monitoring. English...
Ustream. You must first establish an account on Ustream (www.ustream.tv) After you have established a Ustream account you will use the HP Ucam AP on your PC or mobile device in Direct Connect mode to enter your Ustream account information into the f150.
Direct Mode (to Mobile or PC) You will setup your f150 using the HP Ucam mobile (or PC) AP. Each f150 has a unique Camera ID. ( U2-xxxxxx) A password is not required for first use. You may use the Setup function in HP Ucam to enter a device password once you are connected.
• Start HP Ucam. Go to setup. Scroll down to "Cloud Setting." 1. Select the preferred WiFi network you wish to use and enter its WiFi password, if any. This step enables the f150 camera to get on the local WiFi wireless network for Internet access.
• Connect your camera to your PC bu USB. • HP Ucam will AutoRun (if AutoRun activated automatically.) • If AutoRun is not activated Go to [My computer] search the f150 drive icon for the HP Ucam installation executable. • Once installed, HP Ucam will run. (If not double-click program icon) •...
Control, Audible & Visual Indicators Camera Control Functions Power Off Press Power button for 5 sec. to turn off. Restore Default Press both Mode and Record buttons for Settings 5 seconds to restore default settings. Dashboard Press the Record button for 3 sec. to start Recording loop recording and to invert the image.
No SD card, card is not seated, or card is full. Camera cannot record SD is mot recognized. Format the SD card using HP Ucam or try another SD card. Turn on camera, switch to Direct Mode. Press Camera not found "Refresh"...