Turning The Digital Camcorder On; Configuring The Initial Date And Time Setup; Getting Started; Turning The Digital Camcorder Off - HP T200 User Manual

2.5 Turning the Digital Camcorder On

• To power on the camera:
1. Flip out the LCD panel; the camera will turn on automatically.
2. If the LCD panel is flipped open and the camcorder is off, press [Power Button

2.6 Configuring the Initial Date and Time Setup

• The time setting screen automatically appears to allow you to setup date and time:
1. Touch Year, Month, Day, Hour, Minute, and AM/PM to set.
2. Adjust the numeric value by touching
3. Touch the [OK] icon to validate the setting.
4. Touch the Exit icon
Note
• if the Date and Time Setup screen does not appear when the camcorder is initially powered up,
please follow the setup procedure on page 29.

2.7 Getting Started

• To record video: Press [Video Button] to record video. To stop recording, press it again.
• To pause recording: Press [Pause Button] to pause recording. To continue the recording, press it
again.
• To take a photo: Press [Photo Button] to take photo.
• To view stored videos and photos: Press [Playback Button] or touch
switch to the Playback mode.

2.8 Turning the Digital Camcorder Off

• To turn off the camera: You can either press [Power Button] for one second, or you can close the
LCD panel back to its original position.
Operation
( ) to exit.
/
10
] for one second.
Display Screen
on the LCD monitor to