Installing In Vehicles; Mount To Windshield; Adjust The Camcorder Position - HP f505g Quick Start Manual

2.2 Installing in Vehicles

2.2.1 Mount to Windshield

1. Attach the bracket to the camcorder.
Slide it into the bracket holder until you hear
a click.
2. Before installing the bracket, please use
alcohol to clean the windshield and suction
cup of the bracket. Wait for dry and press
suction-cup on the windshield.
3. Hold the base firmly on the windshield
and press down the clamp to mount the
car holder to the windshield. Make sure
the base is securely locked in place.
Warning: Do not install the camcorder on a
tinted window. Doing so may damage the tint
film.
2.2.2 Adjust the camcorder
position
1. Loose the knob to swivel the
camcorder vertically or horizontally.
2. Then tighten the knob to make sure
the camcorder is securely locked in
place.
5
Knob