Table of Contents
Advertisement
2.5 Connect Front and Rear Cam
Use only the USB cable in package to connect with front camera and rear
camera.
Plug phone jack into front camera's 2CH port. (Front camera is power-off.)
1.
Plug the other end of USB cable (micro USB connector) to rear camera's USB
2.
port.
Turn on front camera's power, the rear camera image will be shown on the
3.
right down corner of front camera screen. According to different models,
press
Power button on front camera to switch front or rear image.
Note:
1. Install rear camera at upper central position of the rear windshield.
2. Rear camera doesn't support hot Plug-n-Play. Please turn off the front camera before plugging the rear
camera.
14
Advertisement
Table of Contents
