Table of Contents
Advertisement
2.3 Exchange Front Cam's Mount
1.
Push down the Adhesive Pad and take it out.
2.
Without Adhesive Pad, you can see 2 holes and 1 up-pointing arrow mark
on the case.
3.
Make sure the up-pointing arrow mark on the T-buckle Mount is up.
4.
Flip over the T-buckle Mount, and put 2 hooks of the T-buckle Mount
onto 2 holes of the case, and push it up until "click" sound is heard.
Note:
When using the T-buckle mount, install it with a suction bracket. Buckle the device and the suction
bracket first, wipe the glass clean, install the suction bracket on the windshield, gently press and
confirm that the bracket is fixed. Loosen the knob on the bracket to adjust the viewing angle of the
device. After adjustment, tighten the knob of bracket.
12
Advertisement
Table of Contents
