2
General description
•
Customised curve for a specific testing material
•
OLED display of 128×32 matrix
•
Converts to all common hardness scales (HV ,HB,HRC,HRB,HRA,HS)
•
Easy to use menu system
•
With miniUSB interface, multiple communication modes are adopted to meet
customized requirements of various users
•
Max. 600 groups of data can be stored in memory
•
Upper and lower limit of hardness can be preset; with alarm
•
Test values software calibration function
•
Working voltage:3.7 V rechargeable Li-Ion battery
•
Continuous working period: approx. 50 h
•
Can be used with impact device Type C, DC, G, D+15, DL, E
•
Smart and skid-proof design
•
Charging indicator
3
Main applications
•
Direct measurement of heavy workpieces and permanently installed parts
•
Measurements during production process, especially in mass production
•
Material identification of metal materials
•
Failure analysis of pressure vessels
•
Bearings and other parts
•
Testing of parts in confined or hard-to-access areas
© PCE Instruments
2