Table of Contents
Advertisement
6 Machine settings
Press the
0
button for approx. 2 seconds to enter the JURA Cockpit� The following settings can be
saved in 'Machine Settings' f:
Programme item
Page
ö ä ä ä
'Switch off after'
'Water hardness'
'Product name'
'Units'
Page
ä ö ä ä
'Choose language'
'Factory setting'
'Empty system'
'Version'
Page
ä ä ö ä
'Lock/enable'
'Product settings'
'One-off settings'
Page
ä ä ä ö
'Accessories'
/
'QR code'
(only shown when using
the JURA Payment
Connect)
Explanation
Set the automatic switch-off time to save energy (switch-off after
15 minutes, 30 minutes or 1 – 9 hours after the last action on the
machine)
Set the hardness of the water used (1 °dH to 30 °dH) to prevent
limescale building up in your machine
Display product images with/without product names on the start
screen
Set the unit for the amount of water (ml or oz)
Set language
Reset your X10 to factory settings (the machine then switches off)
Empty the system to protect the X10 from frost damage during
transport (see chapter 10 'Transport and environmentally friendly
disposal – Transport / Emptying the system')
View software version
Blocking and releasing individual products
Define whether the permanent product settings can be changed or not
Permit/do not permit one-off settings during preparation
(enabled, disabled) When you set the function to 'enabled' for the first
time, a QR code appears� You can scan this to set up Pocket Pilot�
Further information is available at jura.com/payment
6 Machine settings
19
Advertisement
Table of Contents
