Machine Settings - Jura J8 twin Instructions For Use Manual

Maintenance action
Clean the milk system (if heavily soiled, also
dismantle and rinse it)
Rinse the milk pipe
Rinse the water tank
Wipe the surface of the machine with a clean,
soft, damp cloth (e.g. microfibre cloth)
Remove and clean the powder chute for
ground coffee
Changing milk pipe with connector HP3
Change the interchangeable milk spout CX3
Clean the inside of the water tank with a
brush
Clean the top and bottom of the cup grille
Thoroughly clean the drip tray and coffee
grounds container
E Perform a self-diagnosis on a regular basis to check the maintenance status of your J8 twin. To do this, touch
E You will find more information about the maintenance of your J8 twin in the 'Maintenance' area
ance information'.

6 Machine settings

Tap on the start screen to open the Cockpit. In the 'Machine settings' section
Programme item Sub-item
ö ä ä
Page
'Choose language'
'Water hardness'
'Connections'(only 'Wi-Fi connection'
displayed if JURA Wi-Fi
Connect is being used)
'Connect accessory'
Page ä ö ä
'Display' 'Set profile'
'Product name'
'Grinder name'
'Brightness'
'Counter' 'Product counter'
'Maintenance counter'
Daily
Z
Z
Z
Z
Tap, click or scan to watch
the video tutorial on YouTube
Explanation
Set language
Set the hardness of the water used (1 °dH to 30 °dH) to prevent limescale
building up in your machine
Wirelessly connect the J8 twin to the JURA app (J.O.E.
Establish a wireless connection between your J8 twin and the Cool Control milk
cooler or disconnect it again
Create (0–4) profiles in the Cockpit and personalise 3 favourite speciality coffees
for each
Display product images with/without product names on the start screen
Change the names of the grinders, e.g. to specify the beans that are used in
each
Change display brightness (in 10% increments)
View product counter
View the maintenance counter
If necessary Note
See chapter 7 'Maintenance – Cleaning the milk
system'.
We recommend that you dismantle and rinse the
professional fine foam frother once a week (see
chapter 7 'Maintenance – Dismantling and rinsing the
professional fine foam frother')
Z
approx. every
3 months
approx. every
3 months
Z
Z
Z
In the 'Maintenance' area
message 'Maintenance information'
f the following settings can be configured:
6 Machine settings
c of the Cockpit, the
appears.
in the Cockpit.
c in the programme item 'Mainten-
) or disconnect again
®
15