Machine Settings - Jura 759 Instructions For Use Manual

6 Machine settings

Programme item
'Smart mode'
'Product name'
'Add start screen'
'Number of
products'
'Wi-Fi connection'
'Switch off after'
'Choose language'
'Factory setting'
'Water hardness'
'Units'
'Information'
'Connect accessory'
'Display'
'Empty system'
'Product counter'
'Maintenance
counter'
Press the Rotary Switch to open the Cockpit� In the 'Machine
f
setting' section, you can make the following settings:
Explanation
Arrange products by preparation frequency on the start screen after a
certain amount of time (the
mode' is activated)
Display product images with/without product names on the start screen
Define number of start screens (1–4)
Set the number of products on the start screen: 2 products, 5 products or
automatic ('Smart mode')
Z10 connect wirelessly with the JURA app (J�O�E�
chapter 3 'Preparing and using for the first time – Establishing a WiFi
connection')
Set the automatic switch-off time to save energy (switch-off after
15 minutes, 30 minutes or 1 – 9 hours after the last action on the
machine)
Set language
Z10 Restore factory settings (your Z10 will switch off after this)
Set the hardness of the water used (1 °dH to 30 °dH) to prevent
calcification of your machine�
Set the unit for the amount of water (ml or oz)
View software version
Wirelessly connect your Z10 with your JURA app (J�O�E�
Control milk cooler, or disconnect again
Change display brightness (in 10% increments)
Empty the system to protect the Z10 from frost during transport (see
chapter 10 'Transport and environmentally friendly disposal – Transport /
Emptying the system')
View product counter
View the maintenance counter
h symbol in the Cockpit shows that 'Smart
) or disconnect again (see
®
6 Machine settings
) or with the Cool
®
23