Table of Contents
Advertisement
Hardware Installation
Installing a Secondary Display (Dual Display)
The 7610 Motherboard uses an integrated video controller. This controller supports a
Monitor port (VGA) and a Digital Display port (DVI) on the motherboard connector
row. These two ports provide a single display mode (DVI or VGA) or a dual display
mode (DVI and VGA). Dual display mode can be a clone (same video data displayed on
both displays) or an extended desktop (the desktop spans across both displays).
The dual mode is configured using the Intel
1. Power down the system.
2. Connect the secondary display.
3. Apply power to the system.
4.
Note:
Both displays must be connected to the 7610 before powering up the system.
Right click
the Desktop and then select
the control panel. The following screen indicates the system was previously
configured with a single VGA display (Monitor).
Graphics Media Accelerator control panel.
®
Graphics Properties
2-61
from the menu to start
Advertisement
Table of Contents
