Table of Contents
Advertisement
Warning and safety instructions
Technical safety
Unauthorised installation, maintenance and repairs (including
removal of any cover) can cause considerable danger for the user.
Installation, maintenance and repairs must only be carried out by a
Miele authorised technician.
Damage to the oven can compromise your safety. Check the oven
for visible signs of damage. Do not use a damaged oven.
Temporary or permanent operation with a self-sufficient or non-
mains synchronous energy supply system (e.g. isolated networks,
back-up systems) is possible. A requirement for the operation is that
the energy supply system complies with all current local and national
requirements that apply to stand-alone, solar and/or battery
systems.
The protective measures provided in the installation and in this Miele
product must also be assured in their function and operation in
isolated operation or in non-mains synchronous operation, or
replaced with equivalent measures in the installation.
The electrical safety of this appliance can only be guaranteed
when continuity is complete between it and an effective earthing
system. It is essential that this basic safety requirement is present
and tested regularly. If in doubt, the electrical installation should be
checked by a qualified electrician.
The connection data (voltage and frequency) on the data plate of
the oven must match the mains electricity supply in order to avoid
the risk of damage to the oven. Compare this before connecting the
appliance to the mains electricity. If in any doubt, consult a qualified
electrician.
Multi-socket adapters and extension leads do not guarantee the
required safety of the appliance. Do not use these to connect the
oven to the mains electricity supply.
For safety reasons, the oven may only be used when it has been
fully installed.
8
Advertisement
Table of Contents
