Respekta KM4400-28 Installation & User's Instructions page 92

WARNING: If in doubt on local regulations, contact the building authorities.
WARNING: Use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the
wall surfaces around the hob.
WARNING: Make sure the power cord does not pass through kitchen cabinet doors or
drawers.
WARNING: Make sure there is a constant flow of fresh air from the cabinet opening to
the base of the hob.
WARNING: If the hob is installed above a drawer or kitchen cabinet, a thermal protection
must be installed under the base of the hob.
WARNING: The hob must be installed by qualified personnel or technicians. Never install
the hob yourself.
WARNING: The hob should not be installed directly above a dishwasher, refrigerator,
freezer, washing machine or dryer, as moisture could damage the hob electronics.
WARNING: The hob must be installed in such a way as to ensure effective heat
evacuation to improve its reliability.
WARNING: Do not use a steam cleaner.
WARNING: The ceramic glass hob must be connected to a power supply with a general
impedance lower than 0.427 ohm. If necessary, contact the utility service provider for
information on impedance.
Before attaching the mounting brackets
WARNING: Before attaching the mounting brackets, the appliance must be placed on
a stable and smooth surface (use the packaging). Do not lift or grab by the protruding
controls.
Adjustment of bracket position
WARNING: After installation, fasten the hob to the worktop by screwing the four brackets
to the bottom of the hob (see photo).
en-41