Respekta KM4400-28 Installation & User's Instructions page 62

WARNING: If the appliance is installed above drawers, make sure there is sufficient
space between the bottom of the appliance and the top drawer, as this space is essential
for air circulation.
WARNING: Once the hob has been removed from the packaging, check its conditions.
If the product is damaged, do not use the product and contact the RESPEKTA service
network.
Do not cook on a broken or cracked hob. If the hob surface is broken or cracked,
immediately disconnect the appliance from the mains (wall switch) and contact a qualified
technician.
WARNING: The minimum distances from other appliances and kitchen cabinets must be
respected.
WARNING: Before installation and use, make sure that the voltage (V) and frequency
(Hz) indicated on the hob are exactly the same voltage (V) and frequency (Hz) as the
home in which it is to be installed.
WARNING: Clean the appliance regularly to avoid wear of the surface material.
WARNING: Disconnect the appliance from the mains before carrying out maintenance
work.
WARNING: Do not clean the unit with a jet of water or steam.
Clean the unit with a soft, damp cloth.
Only use detergents with a neutral pH to clean the hob surface.
Do not use abrasive sponges, solvents or metal objects.
NOTE: Before installing and/or using the hob, read the instructions carefully.
NOTE: Clean the hob after each use.
NOTE: Always make sure that the bottom of the cookware is clean.
NOTE: Scratches or dark spots on the surface do not compromise the functionality of
the hob.
NOTE: Use a suitable scraper for cleaning the glass.
en-11