Modern Forms Lucid Installation Instructions Manual page 16

5. Hanging the Fan (cont.)
1. Slip the coupling cover, canopy screw cover (painted side face
down), and canopy (opened side up) onto the downrod (Fig. 5A).
Coupling cover goes all the way to the bottom.
2. Carefully reinstall the hanger ball onto the downrod, being sure
that the cross pin is in the correct position, the setscrew is
tightened and wires are not twisted (Fig. 5A).
3. Carefully lift the fan motor assembly up to the mounting
bracket and seat the hanger ball in the mounting bracket socket.
Make sure the tab on the mounting bracket socket is properly
seated in the groove in the hanger ball (Fig. 5A). Rotate the
socket assembly until the ball drops and locks into the hanger
bracket screw.
4. Secure the safety cable into the structure beams using the wood
screw, washers, and spring washers provided (Fig. 5B).
Use Hardware E.
NOTE: A Safety cable is required for all installations in Canada.
Safety cable is required for ceiling fan and light combinations over
35 lbs. in both flush and downrod models in the United States.
16 Lucid Instructions
Use Hardware F.
FR-W2304-62L