BEA IXIO-DT1 Quick Start Manual page 8

4
SETUP
SETUP 1 (QUICK)
either hold the knob for 2 seconds, or use the remote
control buttons as specified
SETUP 2 (ASSISTED)
test of full door cycle + reference picture
either hold the knob for 4 seconds, or use the remote
control buttons as specified
TEST THE PROPER OPERATION OF THE INSTALLATION BEFORE LEAVING THE PREMISES!
Page 8 of 12
Set up the sensor using either push-buttons or the remote control.
STEP OUT OF THE INFRARED FIELD!
+
2 s
+
4 s
+
LED flashes red-green
75.5751.12 IXIO-DT1 20230913