Advertisement
xTablet T1110
Getting Started
Power Supply
This section provides basic safety precautions when using an AC/DC adapter and battery.
AC/DC Adapter
Ensure the xTablet T1110 is connected to an AC power source via the AC adapter before turning it on
for the first time. If the xTablet automatically shuts down due to low battery power, it is likely to cause
system failure. Below are some Dos and Don'ts for an AC/DC adapter.
Dos
•
Use the adapter that shipped with xTablet T1110 only.
•
Always be aware of heat coming from the AC/DC adapter while in use.
•
Unplug the AC power cord before disassembly the notebook.
Don'ts
•
Never cover an adapter that is in use as it can generate heat.
•
Have the AC power cord plugged after powering off the system when the notebook is going to be left unused
for a longer time.
Plug the AC/DC Adapter
1. Plug the DC end into the USB-C Power Delivery (PD) port of the xTablet T1110.
2. Plug the AC/DC adapter into the power outlet.
3. When removing, follow steps in reverse order.
(NOTE: The interchangeable plug may vary depending on countries or regions.)
14
Advertisement
