xTablet T1190
Getting Started
Power Supply
This section provides basic safety precautions when using an AC/DC adapter and battery.
AC/DC Adapter
Ensure the xTablet T1190 is connected to an AC power source via the AC adapter before turning it on
for the first time. If the xTablet automatically shuts down due to low battery power, it is likely to cause
system failure. Below are some Dos and Don'ts for an AC/DC adapter.
Dos
•
Use the adapter that shipped with xTablet T1190 only.
•
Always be aware of heat coming from the AC/DC adapter while in use.
•
Unplug the AC power cord before disassembly the notebook.
Don'ts
•
Never cover an adapter that is in use as it can generate heat.
1. Plug the DC end of the AC/DC adapter into the DC-in jack of the xTablet T1190.
2. Plug the AC/DC adapter into the power outlet.
3. When removing, follow steps in reverse order.
(NOTE: The interchangeable plug may vary depending on countries or regions.)
14