Flowline starter for camera & gimbals w placid stabilizing arm (17 pages)
Summary of Contents for Flycam FLCM-EDGE-V1
Page 1
Flowline Edge V1 Stabilization Arm for Flowline Rigs, Cameras & Gimbals (FLCM-EDGE-V1) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2
Flowline Edge Setup • Loosen the screw of the Camera Hook attached to the Flowline Support Arm (Not Included) using the Allen key. • Similarly, remove the second screw. • Now, remove the Hook from the Flowline Support Arm (Not Included).
Page 3
• Dissemble the Camera Hook and the Support Rod from the Vest. • To detach the extension from the Support Rod of the Vest, remove its screw using a screwdriver. • Detach the extension from the Support Rod (Not Included) and align the cord with the height riser, as shown in the image.
Page 4
• After loosening the knob, remove it and pull the rod of Flowline Edge to open it. Feature: Foldable Design of Flowline Edge makes it easier to store. • After opening the Rod, insert the knob and properly tighten it, as shown in the image. Feature: The top bar allows for 180°...
Page 5
• After inserting the cord in the Cup, pull it outwards and insert it in the Cord Lock. • After inserting it into the Cup, tie it properly with the Cord Lock. • Attach the Camera Hook (Not Included) the Cup. •...
Page 6
YOUR FLYCAM FLOWLINE EDGE V1 STABILIZATION ARM ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.